Manufactures & exporter of seals braided mechanical compression packing,  gasket materials from Pearls
  Home | Company Profile | Products | News| OEM | Contact Us
 Products List
  EXPANDED GRAPHITE PACKING
  EXPANDED GRAPHITE WITH INCONEL WIRE INSERTED
  GRAPHITE WITH CARBON FIBER INSERTED
  EXPANDED GRAPHITE YARNS
  KEVLAR FIBER PACKING
  CARBONIZED FIBER PACKING
  CARBONIZED FIBER WITH GRAPHITE LUBRICANT PACKING
  CARBON WITH GRAPHITE PACKING
  PURE CARBON FIBER WITH PTFE PACKING
  CARBON FIBER WITH GRAPHITE CORE PACKING
  CARBON FIBER WITH SILICONE CORE PACKING
  PTFE FIBER WITH OIL PACKING
  PURE PTFE FIBER PACKING
  PTFE WITH GRAPHITE PACKING
  SUPER PTFE FIBER WITH GRAPHITE PACKING
  GFO FIBER PACKING
  PTFE INTER BRAIDED PACKING
  PTFE WITH SILICONE CORE PACKING
  SYNTHETIC FIBER WITH PTFE PACKING
  GLASS FIBER WITH PTFE PACKING
  PURE WHITE PACKING
  SYNTHETIC FIBER WITH SILICON CORE PACKING
  SYNTHETIC PACKING
  PTFE AND SYNTHETIC INTER-BRAIDED PACKING
  GRAPHITE PTFE AND SYNTHETIC FIBER INTER-BRAIDED PACKING
  GRAPHITE PTFE AND KEVLAR FIBER INTER-BRAIDED PACKING
  PTFE AND KEVLAR INTER-BRAIDED FIBER PACKING
  GLASS FIBER AND GRAPHITE PACKING
  RAMIE FIBER BRAIDED PACKING
  HIGH PRESSURE ASBESTOS PACKING
  BRAIDED PACKING
  ASBESTOS FIBER PACKING
  GENERAL SERVICE SILICON CORE PACKING
  EXPANDED PTFE JOINT SEALANT
  VALVE STUFFING
  LAYER SEALING STUFFING SYSTEM
  PACKING LOADING TOOL SYSTEM
  EXPANDED GRAPHITE MOLDED STUFFING
  EXPANDED GRAPHITE GASKET
  EXPANDED GRAPHITE SHEET
  SPIRAL WOUND GASKET
  NANO SEALING LINE

Sealing Material - Packing

 
PLS-200 EXPANDED PTFE JOINT SEALANT
Technical data
Temperature -268℃-315℃
Pressure 210Bar
PH rang 0-14
Common standard pls-200
1mm*30m  
3mm*30m 1/8"*15ft
6mm*30m 1/4"*15ft
9mm*30m 3/8"*15ft
12mm*30m 1/2"*15ft
16mm*30m 5/8"*15ft
19mm*30m 3/4"*15ft
25mm*30m 1"*15ft
 

Pearls 200 is adopted the micro-fibrillated structure 100% PTFE The micro-fibrillated structure tums ordinary PTFE into a dimensionally strong, creep resistant gasket material. It is soft and pliable to conform to worn or uneven flange surface and effect a tight seal. Yet it is resistant to cold flow and creep for long reliable life. The tape is with adhesive back for ease of installation at plant or scene. It can use at steam contain, flange, man-hole, glass joint, ceramic joint, heat transfer, water system, hydraulic pressure, gas system, pump or compression machine flange etc.


 
Typical PLS-200 Joint sealant property
Tensile strength Psig (Kpa)
(ASTM f-152) 
2.000(13.790)
Compressibility %(ASTM f-36) 55-80
Leakage rate (ml/min)
(ASTM F-37-8)
0.13
Variation of compressibility %(ASTMF-38) 40
Copyright Ningbo Diorme Electric Co.,Ltd. 2005-2008, Powered by China Promoter